Flat Panel
Cold room panels are interlocking panels produced by injecting 42 (+/-2) kg/m³ density polyurethane foam between 0.50 mm sheets on both sides. They can also be produced without locks upon request.
Density
Fire Resistant
Soundproofing
Water Resistant
Heat Insulation
Easy Installation
GENERAL INFORMATION
The panel surface materials available are POLY, PVC, Cr-NI, and GALVANIZED steel. The panel thicknesses are 50, 60, 80, 100, 120, 150, 180, and 200 mm, and the width is 1110 mm. The panel lengths can be produced up to 12800 mm depending on the room shape. The panel surfaces are smooth, hygienic, and easy to clean. The panels are designed specifically to prevent heat loss with their accessories. During production, a 50-micron surface protection film is applied to the steel surface. The panel joints are at a maximum level, and heat loss is at a minimum level, resulting in material savings.
The panels are produced according to the standard B2 fireproof class, but they can also be produced according to the preference of the B1 fireproof class. The panels are held in a 600-ton press for a minimum of 30 minutes and a maximum of 90 minutes, depending on the panel thickness, until their reaction is completed.
| FEATURES | VALUES |
|---|---|
| Panel Width (cm) | 30 – 40 – 50 – 111 |
| Panel Thickness (mm) | 50 – 60 – 80 – 100 – 120 – 150 – 180 – 200 |
| Panel Density | 40±2 kg/m³ |
| Sheet Coating Types | Polyester – PVC – CrNi |
| Colour | RAL 9002 |
| Pattern | Notched – Straight |
| Insulation | Polyurethane |
| Sheet Thickness (mm) | 0,50 mm |
| FEATURES | VALUES |
|---|---|
| Yield Strength of Sheet Surface (fct) | min. 220N/mm² |
| Tensile Strength of Panel | min. 0,018 Mpa |
| High Temperature Transverse Tensile Module | min. 0,04 MPa |
| Core Material Shear Strength (fcv) | min. 0,11 Mpa |
| Core Material Shear Modulus (G) | min. 2 MPa |
| Core Material Compressive Strength (σ10) | min. 0,09 Mpa |
| Bending Moment Capacity and Rigidity – Flat (Mu) | min. 2,3 kNm/m |
| Bending Moment Capacity and Rigidity – Reverse (Mu) | min. 2 kNm/m |
| Torsional Stress Straight (σw) | 115 MPa |
| Torsional Stress Reverse (σw) | 100 MPa |
| Bending Moment Capacity on a Central Support – Straight | 2,95 kNm/m |
| Bending Moment Capacity on a Central Support – Inverse | 3 kNm/m |
| Torsional Stress Capacity on a Central Support – Straight | 133 MPa |
| Torsional Stress Capacity on a Central Support – Reverse | 118 MPa |
| PUR Thermal Conductivity Value (ʎ) | max. 0,022 W/mK |
| Dimensional Stability | Seviye DS(TH) 11 |
| Inflammability Class (TS-EN 13501-1) | C-s2,d0 |
| FEATURES | VALUES |
|---|---|
| Thickness | ± %4 |
| Length | ± 10 mm |
| Width | ± 2 mm |
| Deviation from Miter | ± 5 mm |
